DISCOVER

Scott Equipment’s Pit Eliminator Conveyor

The Scott Pit Eliminator Drag Conveyor is ideal for facilities that are looking to unload grain quickly and efficiently at ground level.

The flat bottom conveyor provides greater capacity in less overall height. The square construction gives 55-degree side slopes on the bypass inlet with maximum space between the protective shroud and side slope. A dust tight take-up section uses 1/4″ thick rubber gaskets with positive eccentric cams, tightly locking the gasket for dust containment.

Scott Equipment also offers a Double Sprocket tail option, which raises the chain return shroud to increase the side wall clearance. This additional clearance prevents products that are not free flowing from bridging together.

A flat bottom along with a true radius on the curved and tailed sections allows for positive clean-out in these areas.

DISCOVER

Scott Equipment’s Pit Eliminator Conveyor

The Scott Pit Eliminator Drag Conveyor is ideal for facilities that are looking to unload grain quickly and efficiently at ground level.

The flat bottom conveyor provides greater capacity in less overall height. The square construction gives 55 degree side slopes on the bypass inlet with maximum space between the protective shroud and side slope. A dust tight take-up section uses 1/4″ thick rubber gaskets with positive eccentric cams, locking the gasket tight for dust containment.

Scott Equipment also offers a Double Sprocket tail option, which raises the chain return shroud to increase the side wall clearance. This prevents bridging of products that are not free-flowing.

A flat bottom coupled with the true radius on the curved section and tail section allow for positive clean-out in these areas.

Get in Touch